Home page » Useful information » The use of ammonium bifluoride
The use of ammonium bifluoride
AMMONIUM bifluoride (ammonium fluoride acid) 98%
Application:
- etching and engraving glass;
- for chemical glass matting;
- Cleaning boilers and pipes from rust;
- to dissolve deposits in the wells;
AMMONIUM bifluoride successfully replaces the traditional, but a dangerous and aggressive material – hydrofluoric acid, which is very aggressive, corrodes many materials, causing severe burns, releases harmful to breathe fumes. Ammonium bifluoride use instead of hydrofluoric acid is safer for use, storage and transportation and is less harmful, and reduce your costs by 10 – 15%.
Glazier:
Matt drawing on glass can be obtained chemically. For this glass coated with a thin layer of wax. Prepared in advance figure is placed on the reverse side of the glass to the light, and the blunt end of the needle scratched necessary in paraffin sections. Then, using clay to make the glass cell and poured back etching solutions based on ammonium bifluoride.
Ammonium bifluoride use instead of hydrofluoric acid greatly simplifies the processing of glass, making it safer and less harmful, and reduce your costs by 10 – 15%.
For more details on the use of ammonium bifluoride in the glass industry is here.
Petroleum:
In oil extraction method has been successfully applied acidizing bottom-hole, you can restore and improve the filtration characteristics, dissolve and loosen deposits in the well and increase the permeability layer zones and thus debit wells.
Usually for cooking acidic mixture used technical Hydrofluoric acid. When you replace it on ammonium bifluoride savings of 10-15%. For comparison, if the acid used in the working mixture of hydrofluoric acid (45%), it would take 1.55 times more than if we use a dry ammonium bifluoride.
Quality indicators of ammonium bifluoride.
With us you can always buy as ammonium bifluoride, and hydrofluoric acid 40% and 70%.
Call us at (495) 133-02-40
Or send a request for info@chimko.com